Microstepping Motor Drives

3540M

Microstepping Motor Drives

查看下面所有型號

下單

DC Bus Voltage 12 to 40 Vdc Motor Supply
Switch Selectable Motor Currents from 0.4 to 3.5 A/Phase
Optically Isolated 5 Vdc Inputs for Step, Direction and Enable
Enable Input to Turn Off Current to the Motor
Screw Terminal Connectors
MOSFET, Dual H-Bridge, Inaudible PWM Amplifier
Pulse Width Modulated Current Control

驅動器和發(fā)動機 - 查看相關產品

產品描述

The 3540M/MO step motor drivers are microstepping drives with up to 12,800 steps per revolution, with MOSFET three state switching amplifiers and optoisolated circuits. Both drives include 5 optically isolated inputs, and the 3540MO features external speed control, tach output, and internal pots for accel/decel rate along with high/low speed range selection.

The 3540M drive is a step and direction drive, and includes an automatic feature (switch selectable) to lower motor current by 50% anytime the motor is left at rest for more than one second. Additionally there is a switch-selectable self-test which rotates the motor 1/2 revolution in each direction at 100 steps/second. This drive is compatible with PLCs which feature high-speed pulse output, such as our ELC-PLC series and OCS XL series.
Note: the Step, Direction, and Enable inputs are +5V-logic compatible. For operation with +24V signals, a 3600-ohm series resistor is required on each input. See the drive manual for details.

The 3540MO drive has an on-board oscillator which allows the motor speed to be controlled by an analog voltage or external joystick. This drive is ideal for continuous motion applications such as mixers and blenders. A tach output is also available on this drive.

Motor current for both drives is selected from 32 levels by a DIP switch. Microstepping resolution is selectable by DIP switch on the 3540M. On the 3540MO, microstepping resolution is fixed at 12,800 steps/revolution.

Learn more about stepper motors and drives: Introduction to Stepper Motors and Drives

Click here for more info on the ELC series PLC: ELC-PLC Series

Click here for more info on the OCS XL series PLC: OCS XL Series

Power Supply (Required for Drive Operation): Recommended: OMPS150A24

訂購所有價格均為人民幣稅前價格，不包括13%增值稅和運費！(指定型號)

其他客戶同時購買: 這個圖標可以點擊擴大，跳出的清單包括了其他客戶在購買此產品時同時購買的其它產品。

產品編號產品描述

數(shù)量

產品描述

3540M

咨詢

貨期:

Microstepping step motor drive, 3.5 A/phase, 40 VDC

3540MO

咨詢

貨期:

Microstepping step motor drive with digital oscillator

Recommended Motors

OMHT17-075

￥1,149.56

貨期: 12 周

NEMA 17, 62.8 oz-in holding torque

OMHT17-275

￥845.48

貨期: 6 周

NEMA 17, 62.3 oz-in holding torque

OMHT17-278

￥999.86

貨期: 6 周

NEMA 17, 113 oz-in holding torque

OMHT23-393

咨詢

貨期:

NEMA 23, 76.6 oz-in holding torque

OMHT23-593

￥999.86

貨期: 6 周

NEMA 23, 79.3 oz-in holding torque

OMHT24-100

￥1,122.84

貨期: 6 周

NEMA 24, 123 oz-in holding torque

OMHT23-397

咨詢

貨期:

NEMA 23, 177 oz-in holding torque

OMHT23-597

￥1,110.14

貨期: 9 周

NEMA 23, 177 oz-in holding torque

OMHT23-400

咨詢

貨期:

NEMA 23, 264 oz-in holding torque

OMHT23-600

￥1,637.47

貨期: 6 周

NEMA 23, 264.8 oz-in holding torque

Accessories

OMPS150A24

咨詢

貨期:

Stepper drive power supply, 24 VDC, 6.3A

Power Cord-SE

￥133.13

貨期: 5 周

AC Power cord with stripped end termination

† 所有金額以RMB顯示
注: To see torque-speed curves for recommended motors, click on "Specs" above.
訂購示例: (1) OMHT23-597 NEMA 23 stepper motor, 177oz-in holding torque, ￥1,110.14

產品手冊:

下載 3540M - Step Motor Driver

下載 3540MO Series - Step Motor Driver