The B07 series has been discontinued. Please contact our Flow Engineering department.
General purpose air filter/pressure regulators are
designed for in-line use as a single
regulating control filtering source for
compressed air. These air regulator/filters
are full flow ported for excellent flow and
regulation characteristics for pneumatic equipment. They are
availanle in ¼" PTF threads, a transparent bowl, relieving
diaphragm, gauge, automatic or manual drain and a
0.3 to 8.6 bar (5 to 125 psig) pressure
adjustment range. They are suitable for a
wide range of pneumatic tools and
components and an excellent point of use
filter/regulator. These units can be panel
mounted with a 30 mm (1.19") diameter
mounting hole or can be used with the
optional bracket and panel nut. Reducer bushings are also available
to use with 1/8" NPT threads.
SPECIFICATIONS Operating Temperature*: -30 to 50°C (-22 to 122°F) Maximum Pressure: 8.6 bar (125 psig) Materials: Body: Zinc Bonnet: Acetal Bowl: Transparent Polycarbonate Valve Seat: Acetal Element : B07: Sintered polypropylene B39: Synthetic fiber and polyurethane foam
* Air supply must be dry enough to avoid
ice formation at temperatures below
2°C (35°F)
