楔形流量計
壓差設計

FW1000 Series

查看下面所有型號

下單

No Required Inlet or Outlet Straight Plumbing
±2% Full Scale Accuracy
±0.5% Full Scale Repeatability
Compact and Rugged
Linear Analog Output

產品描述

The FW1000 Series has been discontinued. Please see the FDT7000 Series as a possible alternative or contact our Flow Engineering Department.

The FW1000 series are minimally invasive, low-cost segmented wedge flow sensors. The segmented wedge element provides a simple and reliable restriction for sensing flow as related to pressure differential. The FW1000 design allows users to install the meter in any full pipe orientation (horizontal, vertical or inverted). It is compact and rugged measuring less than 254 mm (10") long and 89 mm (3½") wide, with a flanged mounting base for simple installation. This series is offered with several ranges of calibration to accommodate the requirements typical to process water applications. Three standard NPT port sizes are available to accommodate installations. The standard unit can also be converted to a 1 to 10 Vdc output in the field.

SPECIFICATIONS
Accuracy: ±2% of full-scale
Repeatability: ±½% of full-scale
Maximum Operating Pressure: 8.6 bar (125 psig) Maximum Operating Temperature: 76°C (170°F)
Standard Test Media: Tap water @ 21°C (70°F)
Electronic Output: 0 to 5 Vdc (standard), 4 to 20 mA (optional)
Power Requirements: 12 to 35 Vdc
Flow Measuring Range: 0.5 to 15 GPM (1.9 to 57 LPM) full-scale
Turn Down Ratio: 10:1
Maximum Current Consumption: <50 m ADC
Minimum Load Resistance: 1000 Ω
Maximum Transmission Distance: <61m (<200')
Resolution: Infinite
Response Time:<500 mS to 90% (step change)
Protection: Short circuit, transient and reverse polarity
End Ports: PVC
Wedge Element: PVC
Pressure Sensor: Polyetherimide
Electrical Enclosure: Polycarbonate

† 所有金額以RMB顯示
注: Comes complete with operator's manual.
訂購示例: (1) DPF64 Digital rate meter, ￥4,191.35 plus (1) TX4-100 Multi conductor wire, ￥608.45, ￥4,191.35 + 608.45 = ￥4,799.80

產品編號生成器

在此處生成您自己的產品編號

	(1)	(2)	(3)
FW1

選項說明:

(1) Fittings 選項:
1 for 3/8 NPT
2 for 1/2 NPT
3 for 3/4 NPT

(2) Range 選項:
05 for 0.5 to 5 gpm
10 for 1 to 10 gpm
15 for 1 to 15 gpm

(3) Output 選項:
無（選項為空白） for 0 to 5 Vdc
-I for 4 to 20 mA

注: 并非所有組合都有效，請查閱規格表上的有效產品編號。

楔形流量計壓差設計

FW1000 Series

楔形流量計
壓差設計