LVCN318 Series has been discontinued. Please see LVU503 series as possible alternative or contact our sales department.
OMEGA’s LVCN318 ultrasonic level
transmitter and controller provides
continuous level measurement up to
5.5 m (18') with a 4 to 20 mA signal
output, and is configured via our free
software via a USB adaptor. The
level sensor has 4 programmable
relays with selectable hysteresis and
fail-safe logic. The embedded level
controller can lower cost by replacing
external control hardware. This
non-contact liquid level sensor is
ideally suited for corrosive, sticky or
dirty liquids, and is widely selected
for day tank, skid, IBC, sump and
process tank level applications.
Specifications Range: 5.5 m (18') Accuracy: ±0.2% of range Resolution: 2 mm (0.079") Dead Band: 20 cm (8") Beam Width: 7.62 cm (3") Configuration: USB PC Windows® USB 2.0 Memory: Non-volatile. The level sensor is configurable via our free PC software and USB adaptor. The sensors are offered with and without USB connectors. Connectors can be used to configure any compatible level product. Download your free copy at: omega.com/ftp Supply Voltage: 24 Vdc (loop) Consumption: 0.5W Loop Resistance: 400ù max Signal Output: 4 to 20 mA, two-wire Signal Invert: 4 to 20 mA or 20 to 4 mA Signal Fail-Safe: 4 mA, 20 mA, 21 mA, 22 mA or hold last Contact Type: (4) SPST relays Contact Rating: 60 VA, 1A maximum Contact Fail-Safe: Power loss; hold last Echo Loss: Open, close or hold last Hysteresis: Selectable Process Temperature: -7 to 60°C (20 to 140°F) Temp Comp: Automatic Ambient Temperature: -35 to 60°C (-31 to 140°F) Pressure: Maximum Working Pressure = 2 bar (30 psi) Enclosure Rating: Type 6P, encapsulated, corrosion resistant and submersible Encl Material: Polycarbonate Trans Material: PVDF Cable Jacket Material: Polyurethane Cable Type: 9-conductor, shielded Cable Length: 1.2 m (48") Process Mount: 2 NPT (2" G optional) Mount Gasket: FKM Classification: General purpose Compliance: CE, RoHS
† 所有金額以RMB顯示 注: Comes complete with mounting gasket, and operator’s manual.
Configuration software available free at omega.com/ftp
