差分pH或ORP探頭

PHETX-600 Series

Differential pH or ORP Probes

查看下面所有型號

下單

Integral 2-Wire 4 to 20 mA Transmitter
Accurate Differential Measurement
Eliminates Ground Loop Interference
Built-In Pre-Amp Supports Up to 914 m (3000') Sensor-to-Analyzer Distance
4.6 m (15') Standard Cable Length
Automatic Temperature Compensation on pH Versions

工業pH儀表和電極 - 查看相關產品

產品描述

OMEGA™ pH and ORP differential probes stay in service and provide accurate measurements under conditions that often render conventional pH probes inoperable. These probes, come with an integral encapsulated 4 to 20 mA 2-wire transmitter to feed directly to a PLC or a DCS.
The PHETX-600 and ORETX-600 probes employ a differential measurement technique. Unlike conventional combination probes, the differential probe has two high impedance measurement circuits containing a common metallic return electrode. One circuit includes the process measurement electrode which generates a potential E1 proportional to the process pH. The second circuit includes an internal measurement electrode immersed in a stable buffer solution which generates a standard reference potential, E2. Both circuit share a common potential E3 developed at the return electrode. The two circuits are fed into amplifiers which provide an output representing the differential between them: (E1 - E 3)– (E2 - E3). The common potential E3 is cancelled out electronically, greatly reducing inaccuracies caused by ground loops which may exist between process and instrument grounds. Ground loop current will flow through the low impedance path of the return electrode, affecting the potential E3, but not the differential measurement.
The differential probe maintains its accuracy and stability in aggressive process applications long after a combination-style probes performance begins to deteriorate. Maintenance costs are reduced and the life of the probe is increased. The internal reference electrode is electrically connected to the process solution by means of a field-replaceable double junction salt bridge which greatly reduces the possibility of contamination of the buffer solution in the reference circuit. Although seldom required, the reference solution may be easily replaced by removing the screw-out salt bridge. A salt bridge and buffers are available for this purpose.
Another advantage of the PHETX/ ORETX-600 series are the semi-flush face which is easily cleaned and avoids solution materials gathering on protrusions found in other probes. The domed glass electrode, the protective metal electrode and the temperature sensor protrude only about ¹⁄8" while the salt bridge is flush. A flat-face version of the pH probe is also available. The PHETX/ORETX-600 series is available in: 1½ NPT threaded body style (-600), “easy-in, easy-out” variable insertion depth version with 1¼ NPT compression fitting (-610), or the hot tap version (-620).

SPECIFICATIONS
Measuring Range:
    pH: 0 to 14 pH (consult factory for applications below 2 or above 12)
    ORP: -500 to 500 mV or 0 mV to 1000 mV, field selectable
Flow Rate: 10 ft/sec max (3 meters/sec) flow should be as low as possible in low conductivity water and in solutions with high suspended solids
Wetted Materials: CPVC, kynar, glass, titanium palladium alloy and EPDM (platinum for ORP probe); opt FKM and ceramic
Transmission Distance: Dependant upon transmission distance and supply voltage 1
Sensitivity:
    pH: 0.001 pH
    ORP: 0.1 mV
Stability
    pH: 0.03 pH per day, non-cumulative
    ORP: 2 mV per day, non-cumulative
Temperature Compensation (Automatic): -5 to 95°C (23 to 203°F)
Pressure Limit: 100 psig at 65°C (149°F) max
Temperature Limits (CPVC): -5 to 95°C (23 to 203°F) the temperature limit of probes in flow through applications is limited by pressure and by the pipe fitting material.
Probe Cable: 4.6 m (15') long

訂購所有價格均為人民幣稅前價格，不包括13%增值稅和運費！(指定型號)

其他客戶同時購買: 這個圖標可以點擊擴大，跳出的清單包括了其他客戶在購買此產品時同時購買的其它產品。

產品編號產品描述

數量

產品描述

PHETX-600

咨詢

貨期:

1 1/2 NPT differential pH electrode with 4 to 20 mA outout

ORETX-600

咨詢

貨期:

1 1/2 NPT differential ORP electrode with 4 to 20 mA outout

PHETX-610

咨詢

貨期:

Compression fitting pH electrode with 4 to 20 mA output for 7/8 to 5" variable insertion

ORETX-610

咨詢

貨期:

Compression fitting ORP electrode with 4 to 20 mA output for 7/8 to 5" variable insertion

PHETX-620

咨詢

貨期:

Hot tap pH electrode with 4 to 20 mA output for 7/8 to 5" variable insertion

ORETX-620

咨詢

貨期:

Hot tap ORP electrode with 4 to 20 mA output for 7/8 to 5" variable insertion

Accessories

PHE-600-SB

￥2,064.17

貨期: 6 周

Replacement salt bridge kit for 600 Series

PHE-612-SB

￥2,064.17

貨期: 6 周

Replacement salt bridge kit for 610 Series

PHE-600-EP

￥2,064.17

貨期: 6 周

Electrode protector for 600 Series

PHE-610-EP

咨詢

貨期:

Electrode protector for 610 Series

PHE-620-BVA

咨詢

貨期:

PVC hot tap ball valve assembly for 620 Series

† 所有金額以RMB顯示
注: Comes complete with electrode, salt bridge and operator’s manual.