重質油法蘭浸入式加熱器

TMO Series

Oil Heaters

查看下面所有型號

下單

Rugged Steel Sheath
Low Watt Density 6 1/2" W/in2
1.2 to 8.4 kW
3 & 5 Inch, 150 Ib. Steel Flange

浸沒式加熱器 - 查看相關產品

產品描述

FEATURES
Rugged construction, Sturdy 0.475" diameter elements welded to steel flanges provide superior rigidity and strength. Heavy duty jumper straps and terminal posts assure permanent tightness of connection’s carrying capacity.

High conductivity elements — Filled with highest purity blends of magnesium oxide refractory (MgO) compacted to a rock hard density to insure maximum thermal conductivity, maximum electrical resistance, and assure long element life.

Heavy coil construction– Watt density on the heating coil is designed for low watt density operation by increasing the coil diameter and length to give maximum coil surface temperature, providing longer coil life.

APPLICATIONS
Heating heavy, viscous oils reduces their viscosity, permitting better pumpability for transfer operations. Lowering the viscosity allows increased system flows for any given horsepower. Transfer system designs can employ smaller motor and drive components ensuring optimum system economy.

Preheating permits use of less expensive fuel oils, allows easier pumping and provides better atomization, increasing combustion efficiency.

CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warning.

kW	Dim. B in. (cm)	Wt.4 Ib. (kg)	E1 General Purpose Enclosure¹	Dim.N³ in. (cm)
3 Inch-150 Lb. Steel Flange, 3 Steel Sheath Elements — 6.5 W/in2
1.2	25 3/16 (64)	17 (8)	TMO-3012L/240V/3P	1 (3)
1.65	33 1/16 (84)	18 (8)	TMO-3016L/240V/3P	1 (3)
2	40 9/16 (103)	20 (9)	TMO-3021L/**/3P	1 (3)
2.5	48 1/16 (122)	21 (10)	TMO-3024L/240V/3P	1 (3)
5 Inch-150 Lb. Steel Flange, 6 Steel Sheath Elements — 6.5 W/in2
1.5	18 1/16 (46)	27 (12)	TMO-6015L/240V/3P	1 (3)
1.8	19 13/16 (50)	30 (14)	TMO-6018L/240V/3P	1 (3)
2.4	25 3/16 (64)	32 (15)	TMO-6024L/240V/3P	1 (3)
3.3	33 1/16 (84)	33 (15)	TMO-6033L/**/3P	1 (3)
4.2	40 9/16 (103)	34 (15)	TMO-6042L/**/3P	1 (3)
5	48 1/16 (122)	37 (17)	TMO-6049L/**/3P	1 (3)
5.4	52 1/16 (132)	38 (17)	TMO-6054L/**/3P	1 (3)
6	58 3/8 (148)	40 (18)	TMO-6060L/**/3P	1 (3)
6.9	65 1/16 (165)	42 (19)	TMO-6069L/**/3P	1 (3)
7.2	68 5/8 (174)	43 (20)	TMO-6072L/**/3P	1 (3)
8.4	78 1/16 (198)	46 (21)	TMO-6084L/**/3P	1 (3)

/** Designate voltage, i.e. insert 240V for 240 Vac or 480V for 480 Vac.
Note: Larger flange sizes and kW ratings and power supplies are available. contact OMEGALUX.
1 Heaters with General Purpose and Moisture Resistant Enclosures are UL Listed and CSA Certified.
2 Heaters with Explosion Resistant Enclosures are CSA NRTL/C certified and are not intended for use in hazardous areas.
3 E1 enclosure “N” designates conduit size, E2/E3/E4 enclosures “N” designates NPT threat size.
4 Weights:
A. For Wt. of 3" flange with E2 enclosure, add 3 lbs. to Wt. of E1 enclosure.
B. For Wt. of 5" flange with E3 or E4 enclosure, add 7 lbs. to Wt of E1 enclosure.

訂購所有價格均為人民幣稅前價格，不包括13%增值稅和運費！(指定型號)

產品編號產品描述

數量

產品描述

Example part numbers are shown below. For additional configurations see the Part Number Builder below this table.

TMO-6084L/480V/3P

咨詢

貨期:

Heater, 8.4 kW, 480 V, 6 steel sheath elements, 3 phase power

† 所有金額以RMB顯示

產品編號生成器

在此處生成您自己的產品編號

	(1)	(2)		(3)
TMO-			L/		/3P

選項說明:

(1) Number of Steel Sheath Elements 選項:
3 for 3 Steel Sheath Elements
6 for 6 Steel Sheath Elements

(2) Wattage 選項:
012 for 1.2 kW
016 for 1.65 kW
021 for 2 kW
024 for 2.5 kW
015 for 1.5 kW
018 for 1.8 kW
024 for 2.4 kW
033 for 3.3 kW
042 for 4.2 kW
049 for 5 kW
054 for 5.4 kW
060 for 6 kW
069 for 6.9 kW
072 for 7.2 kW
084 for 8.4 kW

(3) Voltage 選項:
240V for 240 V
480V for 480 V

注: 并非所有組合都有效，請查閱規格表上的有效產品編號。