工業型旋轉編碼器，帶單通道或正交輸出 - 可轉換為工業長度傳感器

ZB SERIES Rotary Encoder

Industrial Duty Rotary Encoder, Length Sensor

查看下面所有型號

下單

Single Channel or Quadrature Output Models
Current Sinking, 250 mA Maximum
4.75 to 28 Vdc Supply Voltage
Up to 1000 PPR for High Resolution Precision Counting or Speed Measurement
6000 RPM Shaft Speed
Conversion Bracket for Length Sensor Measurement

產品描述

AU-ZBG10002 encoders with the length sensor conversion kits are used for precise speed control in Omega's manufacturing process for metal sheath thermocouple wire.

The ZB Series shaft encoders are general duty industrial rotary pulse generators. The AU-ZBG models are for single channel sensing for counting, one directional measuring or speed applications. The AU-ZBH models are for quadrature applications, allowing for counting up and down along with speed and direction measurements. A conversion bracket is available to easily convert this encoder into a length measuring sensor. They can be direct-coupled to a machine shaft by means of a flexible-bellows, spring, or rubber sleeve type coupling that allows for axial and radial misalignment. They can also be coupled with light instrument timing-belts. Timing-belt drives also allow convenient gear-up or geardown speed ratio changes that can be useful for obtaining non-standard PPR rates.

Specifications
Supply Voltage: 4.75 to 28 Vdc
Output: Current sinking, 250 mA maximum current per output
Maximum Frequency: 1000 ppr, 20 KHz
Connections: 6-pin MS style connector (male) (MIL-C-5015)

See SPECS above for full specifications and additional information on length sensor conversion kit.

訂購所有價格均為人民幣稅前價格，不包括13%增值稅和運費！(指定型號)

產品編號產品描述

數量

產品描述

AU-ZBG01002

咨詢

貨期:

Single channel shaft encoder, 100 ppr

AU-ZBG10002

咨詢

貨期:

Single channel shaft encoder, 1000 ppr

AU-ZBH01002

咨詢

貨期:

Quadrature encoder shaft encoder, 100 ppr

AU-ZBH10002

咨詢

貨期:

Quadrature encoder shaft encoder, 1000 ppr

22 AWG shielded cables, 4-conductor with drain

CCARPG01

咨詢

貨期:

10 foot cable with 6-pin MS connector

CCARPG25

咨詢

貨期:

25 foot cable with 6-pin MS connector

CCARPG50

￥1,351.44

貨期: 2 周

50 foot cable with 6-pin MS connector

Flexible Shaft Couplings

AU-RPGFC002

咨詢

貨期:

Shaft diameter 0.250 - 0.375", 28mm long & 20mm diameter

AU-RPGFC003

咨詢

貨期:

Shaft diameter 0.375 - 0.375", 28mm long & 20mm diameter

AU-RPGFC004

咨詢

貨期:

Shaft diameter 0.375 - 0.500", 40mm long & 32mm diameter

AU-RPGFC005

咨詢

貨期:

Shaft diameter 0.375 - 6mm, 22mm long & 16mm diameter

Accessories

AU-LSCB1000

咨詢

貨期:

Length sensor conversion bracket

AU-LSAHC001

咨詢

貨期:

Hing clamp assembly for length sensor conversion bracket

AU-WF1000F

咨詢

貨期:

1 foot circumfrence urethane measuring wheel

AU-WF1000K

咨詢

貨期:

1 foot circumfrence knurled measuring wheel

AU-WM0400F

咨詢

貨期:

4/10th meter circumfrence urethane measuring wheel

AU-WM0400K

咨詢

貨期:

4/10th meter circumfrence knurled measuring wheel

† 所有金額以RMB顯示
注: Note: NPN Transistor outputs have 1.5 Kù load resistors returned to supply for internal feed back purposes. This does not interfere with the ability to use these outputs as conventional “Open-Collector” outputs as long as the supply voltage for the ZB is supplied by the indicator or control receiving its output signal. The ZB’s internal load resistor also allows the output to be used as a current source, however, load current must be limited to 1 mA maximum